California Cannabis Compliance: What Licensed Operators Need to Know (2026)

California cannabis compliance guide for licensed operators: DCC testing, labeling, track-and-trace and recall rules, plus what changed in 2026.
Cannabis & Psychedelics
Audits & Inspections
Blog
November 14, 2026

Last reviewed: November 2026. Rules change often; confirm with the Department of Cannabis Control.

California regulates commercial cannabis through a single state agency, the Department of Cannabis Control (DCC). Cannabis is legal in the state for both medicinal and adult use, and licenses carry an A- (adult-use) designation, an M- (medicinal) designation, or both. A state license is only half the picture: every licensee also needs approval from the city or county where it operates.

This guide is for licensed cultivators, manufacturers, distributors, retailers and labs. It skips the application process and covers what DCC expects once you're operating, including what changed in the last 12 months.

Who regulates cannabis in California

DCC issues every state cannabis license and enforces the Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA), Business and Professions Code section 26000 and following. The detailed operating rules are in the California Code of Regulations, Title 4, Division 19. Westlaw hosts the official version, and DCC publishes a searchable copy on its regulations page. At the time of this review, DCC's copy reflected the rules in effect on October 1, 2026.

Local approval works alongside the state license. Each city or county decides whether to license all cannabis business types, some of them, or none. County rules only cover unincorporated areas; incorporated cities set their own, which don't have to match the county's. According to DCC's February 2026 data, 47% of California's cities and counties allow at least one type of cannabis business, and 53% allow none. When an applicant submits a local permit, DCC confirms it with the jurisdiction, and the regulations require licensees to tell DCC if a local permit is revoked after licensure (section 15035).

What changed in the last 12 months

These changes come from DCC's rulemaking page, its federal rescheduling resources and the current regulation text.

WhenWhat changedWho it affects
January 1, 2026Standards for animal cannabis products took effect. Cannabis products couldn't be marketed or sold for animals before this date.Manufacturers, distributors, retailers
January 1, 2026The regulations state that no provisional license is effective after this date.Any remaining provisional licensees
April–June 2026DCC reports the federal government announced the rescheduling of medicinal cannabis, and state-licensed medicinal businesses can register with the DEA. DCC also streamlined changes to A- and M-designations and, on June 5, adopted emergency rules letting retail licensees split a combined A/M license into separate A and M licenses.M-designated licensees, retailers, cultivators
July 1, 2026Cultivation rules were streamlined and new minimum sanitation standards took effect (animals and animal waste, tools and equipment, handwashing and glove use, unsanitary conditions).All licensees
October 1, 2026Updated action levels for pesticide residue testing took effect.Cultivators, manufacturers, labs
ProposedTrack-and-trace updates (every party to a transfer approves it before a manifest is generated; retailers provide COAs to customers on request), a new multipack product category, group tagging of plants, and permanent adoption of the A/M license split.Check DCC's rulemaking page for status

DCC notes its rescheduling page isn't advice on joining the federal medicinal program; talk to counsel if you're weighing DEA registration.

California cannabis license types

DCC issues licenses by activity, so a business doing more than one activity may need more than one license. Here's how the main types break down.

LicenseWhat it allowsKey notes
Cultivation: specialty cottage, specialty, small, medium, largeGrowing cannabisType depends on lighting (outdoor, indoor, mixed-light tier 1 or 2) and canopy size
Cultivation: nurseryClones, immature plants, seeds and other propagation materialPropagation only
Cultivation: processorTrimming, drying, curing, grading, packaging and labelingNo growing
Manufacturing Type 7Volatile solvent extraction (such as butane, hexane, propane), plus Type 6 activitiesSee the closed-loop extraction rules (section 17206)
Manufacturing Type 6Non-volatile solvent (such as ethanol, CO2) or mechanical extraction, infusion, packaging and labeling
Manufacturing Type NInfusion, packaging and labelingNo extraction
Manufacturing Type PPackaging and labeling only
Manufacturing Type SLimited extraction, infusion, packaging and labeling in a registered shared-use facilitySeveral Type S licensees rotate through the same space and equipment
Distribution Type 11Moving goods between licensees and to retail, storage services, arranging testingAll transfers between licensees go through a licensed distributor
Distribution Type 13 (transport only)Moving goods between cultivation, manufacturing and distribution premisesDoesn't include moving goods to retail premises
Retail Type 10 (storefront)Sales at a physical location, plus deliveryRetailers can't package or label cannabis goods
Retail Type 9 (non-storefront)Delivery-only sales
Microbusiness Type 12At least three of: cultivation (up to 10,000 sq ft), non-volatile or mechanical manufacturing or infusion, distribution, retail, at one location
Testing laboratoryRegulatory compliance testingISO/IEC 17025 accreditation; must stay independent of other license types
Event organizerRunning temporary cannabis eventsEach event also needs a temporary cannabis event license

Two rules apply to every type. You need a license for each separate premises, and A- and M-designations matter in the supply chain: licensees can trade with each other regardless of designation, but goods labeled "For Medical Use Only" can only go to M-designated retailers and be sold to medicinal customers.

Quality and safety requirements

Testing

DCC requires every batch of cannabis goods to be tested before it can be sold. The required panel covers cannabinoids and terpenes, residual solvents and processing chemicals, residual pesticides, heavy metals, microbial impurities, mycotoxins, moisture content and water activity, and foreign material. Manufactured products have to be in final form, packaged and labeled before they go to a distributor for compliance testing. Distributors arrange the testing and complete a quality-assurance review before goods move on (sections 15304 to 15307).

The lab reports results on a certificate of analysis (COA) showing pass or fail for each test. Within one day of finishing a batch, the lab uploads the COA to the state track-and-trace system and sends a copy to DCC. Labs can't change a COA once it's issued without DCC's permission.

A failed batch can only be destroyed by the distributor or remediated by a manufacturer under a plan DCC approves in advance, then retested. Two related rules catch people out: failed goods can't move from distribution back to manufacturing unless DCC has approved remediation, and passed goods that move back to manufacturing must be tested again.

Labs themselves must hold ISO/IEC 17025 accreditation, follow written SOPs, run a laboratory quality assurance program and take part in proficiency testing. Since January 1, 2024, labs must use DCC's standardized cannabinoid test method for dried flower and non-infused pre-rolls. Updated pesticide action levels took effect on October 1, 2026, so check that your specifications and supplier requirements reflect them.

Treat a failed result as a nonconformance to investigate, not just a batch to dispose of; that's what stops the same failure on the next harvest. Our guide to CAPA covers how.

Packaging and labeling

Cannabis goods sold at retail must be in packaging that is tamper-evident and child-resistant, resealable if the package holds more than one serving, and opaque for edibles. The licensee that packaged the product is responsible for meeting the child-resistant packaging rules. Flower, pre-rolls, topicals, inhaled concentrates and vape cartridges can use single-use child-resistant packaging, which must carry the statement "This package is not child-resistant after opening." Edibles, tinctures, capsules and suppositories need packaging that stays child-resistant for its whole life.

Labels need the universal symbol plus the primary and informational panel content set out in sections 17402 to 17410. Rather than memorizing the panel rules, work from DCC's labeling checklists for bulk products, non-manufactured products in final form and manufactured products in final form, all on its guidance and checklists page.

Packaging and labeling that appeals to people under 21, makes false or misleading claims, or leaves out required information such as allergens or serving details makes a product misbranded. That's grounds for a recall, not just a citation.

Track-and-trace

California's state system is the California Cannabis Track-and-Trace (CCTT) system, which runs on Metrc software. Every package of cannabis or cannabis products carries a unique identifier (UID) tag recorded in the system. DCC's self-inspection checklists spell out what inspectors look for:

  • Receipt, rejection, manufacturing, internal quality control or R&D use, destruction or disposal, packaging or repackaging, and sale or donation are entered within 24 hours of happening.
  • Cultivation events such as planting an immature lot, moving plants to the canopy, flowering and applying plant tags are entered within three calendar days.
  • On-site inventory is reconciled against the system at least once every 30 days, and the results are documented.
  • Transfers onto or off a premises are handled by a licensed distributor, with the manifest created in the system before the transfer happens.

DCC has proposed further changes, including requiring every party to a transfer to approve it before a manifest is generated. Watch the rulemaking page before you rewrite any transfer SOPs.

CCTT is the state's record of your inventory. It doesn't hold your procedures, training or investigations, which is why operators run a quality system alongside it. We cover the difference in how to implement a cloud QMS in the cannabis industry.

Recalls, product holds and complaints

Every licensee needs written recall procedures (section 17226). They must cover the factors that trigger a recall, who is responsible for running it, how you'll notify customers and the licensees who supplied or received the goods, instructions for the public on returning or destroying the product, and how recalled goods are collected and destroyed.

When you discover an adulterated or misbranded product, you put those procedures into action straight away and can issue a voluntary recall. You must notify DCC within 24 hours of starting a recall. If DCC finds the problem first, it sends a recall notice to your designated responsible party, who must reply from their email on file, by the stated deadline, with your recall procedures and draft notifications. Missing it can lead to citations, fines or a mandatory recall.

DCC can order a mandatory recall when a product poses an immediate and serious threat to human life or health and other procedures would cause unreasonable delay (Business and Professions Code section 26039.1). You can request an informal hearing within five days of the order.

Holds happen fast. When DCC has evidence a product is adulterated or misbranded, it places a hold in the track-and-trace system on the batch UID and every package made from it, and the system emails every licensee holding that inventory. You're expected to quarantine immediately. Goods headed for destruction must be quarantined for at least 72 hours, then destroyed on video. Remediating recalled goods requires a corrective action plan and written DCC approval before any reprocessing, repackaging or relabeling.

The regulations also include a section on product complaints (section 17225). Logging complaints in one place and reviewing them for patterns is often how a recall-worthy problem shows up early.

Records, SOPs and inspections

Records of commercial cannabis activity must be kept for at least seven years. DCC must be given immediate access to your licensed premises, and denying access is grounds for discipline. Video surveillance must record around the clock at a minimum of 15 frames per second, and footage must be kept for at least 90 days and be easy to retrieve.

Manufacturers carry the heaviest documentation load, under the good manufacturing practice rules in sections 17207 to 17218:

  • A quality control program for the premises.
  • A product quality plan for each type of product, assessing the risks that could make it adulterated or misbranded or cause it to fail testing.
  • A master manufacturing protocol for each unique formulation and batch size.
  • A batch production record every time a batch is made or remediated.
  • Standard operating procedures and a training program for manufacturing personnel.

If those terms sound familiar, it's because they follow general GMP thinking; our guide to GMP guidelines covers the principles behind them. The new minimum sanitation standards that took effect on July 1, 2026 sit in the chapter that applies to all licensees, so cultivators, distributors and retailers should check their cleaning and hygiene SOPs too.

The simplest inspection prep is DCC's own: its cultivator and manufacturer self-inspection checklists list the major areas inspectors evaluate.

Where operators commonly run into trouble

DCC publishes every recall on its recalls portal, and the same reasons come up again and again. Each one points to a control worth checking.

  • Potency that doesn't match the label. DCC has issued recalls for cannabinoid inflation, where the label claims more THC than the product contains. DCC treats a gap between labeled and actual THC, CBD or terpenoids as adulteration. Check how label claims are set and who signs them off against the COA.
  • Microbial contamination. Aspergillus appears repeatedly in flower recalls. Drying, curing and storage conditions, plus the new sanitation standards, are where to look.
  • Testing gaps. Some recalls cite incomplete, incorrect or invalid compliance testing. Make sure every batch you sell has a complete passing COA tied to the right UID.
  • Packaging and labeling. Packaging attractive to people under 21 and labels missing required information, such as a serving size, both lead to recalls. A label review step before every new SKU or packaging change catches most of these.
  • Chain of custody. DCC has recalled products because a business moved them without a distribution license. Confirm the license status of every partner that handles your goods.

Most come back to the same gap: a procedure that exists on paper but isn't followed, or a problem fixed once without anyone asking why it happened.

How a QMS supports California compliance

A quality management system won't make you compliant on its own, and it doesn't replace CCTT. What it does is keep your procedures, training, investigations and audits controlled, connected and easy to pull up when an inspector asks. Here's how California's requirements map to the Isolocity platform.

RequirementWhat you need to be able to showHow the Isolocity platform helps
Written recall procedure, SOPs, product quality plans, master manufacturing protocolsThe current approved version of each document and its revision historyDocument management: one cloud-based home for controlled documents, with revision control and review dates
Trained manufacturing personnelWho was trained on which procedure, and whenTraining module: assign and track training against the right people
Failed tests, product complaints and recallsThe investigation, root cause, corrective action and proof it workedCAPA: corrective and preventive actions alongside deviations, nonconformances and complaints, with a full audit trail
Checks on incoming materials and finished goodsInspection results tied to the batchInspection module: digital inspections with custom templates, linked to CAPA
Self-inspection before DCC arrivesRecurring internal audits and closed findingsScheduled internal audits, so checks recur instead of slipping

If you're running these records across spreadsheets and shared drives, see how Isolocity supports cannabis quality management.

FAQ

How do I get a cannabis license in California?

You apply to DCC through its online licensing systems, which are split between cultivators and all other license types, and you also need approval from the city or county where you'll operate. Start by confirming your local jurisdiction allows your license type.

How much does a California cannabis license cost?

There's an application fee and an annual license fee. For most non-cultivation licenses, the annual fee is tiered by license type and the business's expected gross revenue; cultivation fees are set by license type. Fees are non-refundable. DCC lists current amounts on its application and license fees page.

Do I need a local permit as well as a state license?

Yes. DCC licenses the activity, but cities and counties decide whether cannabis businesses can operate in their area and on what terms.

What happens if a batch fails testing in California?

It must be destroyed by the distributor or remediated by a manufacturer under a DCC-approved plan, and remediated goods must pass retesting before sale.

Can a retailer hold separate A and M licenses?

Yes. Under emergency rules adopted in June 2026, a retail licensee with a combined A- and M-designated license can request to split it into an A license and a separate M license, which can be held by a related entity with matching ownership. DCC is working on making the rule permanent.

What track-and-trace system does California use?

The California Cannabis Track-and-Trace (CCTT) system, which runs on Metrc.

Conclusion

California's rules shift every year, and 2026 brought new sanitation standards, updated pesticide limits and a new way to split A and M retail licenses, with track-and-trace changes still pending. The operators who handle change well can show, at any moment, the current procedure, who was trained on it and what happened the last time something went wrong. To see how that works in one platform, book a demo.

Sources

This guide is for information, not legal advice.

Testimonanial

Insights and Inspiration,
Explore Our Blog

Isolocity blog cover with a cannabis industry icon and the title Michigan Cannabis Compliance Guide (2026)
No items found.

Michigan Cannabis Compliance: What Licensed Operators Need to Know (2026)

What Michigan's CRA expects from licensed cannabis operators: license types, testing, labeling, Metrc, recalls, records, inspections and 2026 rule changes.
November 15, 2026
13 min read
Layered Process Audits: A Practical Guide blog cover
No items found.

Layered Process Audits: A Practical Guide With Examples

What is a layered process audit? Learn how LPAs work, when customers require them, how often each layer audits, and see an example question bank.
November 10, 2026
9 min read
How to Implement a Cloud QMS in the Cannabis Industry
Cannabis

How to Implement a Cloud QMS in the Cannabis Industry

A cloud QMS keeps cannabis operators audit-ready with controlled SOPs, training records, and traceability. Learn how it differs from seed-to-sale tracking and how to implement one.
August 12, 2026
6 min read